Ürün
LE100
– Affordable
– Smooth and vibration-free operation
– Precision level stop
– Closed-loop vector control without addition of encoder cards
– Identifying the optimal travel path in rescue mode
| Power: | 7.5kW, 11kW, 15kW |
|---|---|
| Current: | 18A, 24A, 32A |
| Input Voltage: | 3 Phase 380V (50-60 Hz) |
| Output Voltage: | 3 Phase, 0~380V - 0~200 Hz |
| Control Methods: | V/F Control, Open-Loop Control, Closed-Loop Vector Control |
| Accessories: | 7-seg display |
| 0~100 Hz: | Speed/ frequency Control |
|---|---|
| Digital panel: | Frequency adjustment |
| 0.1 Hz: | Frequency adjustment accuracy |
Koruyucu Özellikler
- Over-current protection
- External short-circuit protection
- Overload detection and protect the drive beyond the adjusted time and current (maximum 150% of nominal current in 90 seconds)
- Drive shutdown in the case of exceeding the allowable DC bus voltage
- Drive shutdown in the case of dropping below the allowable DC bus voltage
- Limiting the drive current when the heat-sink temperature increases beyond the limit
- Motor over-speed protection
- Immediate terminate of all drive outputs at Base Block stop.
Diğer özellikler
- Position control and DC injection at the start and end of travel
- Up-time and commands logging
- Separate settings for start and stop and speed curves
- Increase or Decrease of torque detection
- Torque compensation
- Accurate estimation of motor slip in open-loop control and accurate output frequency and voltage adjustment
- Automated static calculation of motor parameters
- Two Output Relays: programmable
- Tow digital outputs : programmable
- Eight digital inputs: six of them are programmable
- Modbus compatible
